Tool shanks & power milling chucks · Bupyeong, Incheon
A shank is not an accessory. It is the joint that decides whether the machine's rigidity ever reaches the cutting edge. We make six standards of that joint. 생크는 부속품이 아닙니다. 기계의 강성이 날 끝까지 전달되는지를 결정하는 이음매입니다. 그 이음매를 6개 규격으로 만듭니다.
01 — Families
02 — Where it fits
Before choosing a shank, look at the spindle. These four situations cover most of what our customers run. 생크를 고르기 전에 스핀들을 보십시오. 아래 네 가지가 거래처에서 실제로 돌아가는 대부분의 경우입니다.
03 — Compare
Note. Figures below describe the published standards (JIS B 6339, DIN 69871, DIN 69893 and equivalents), not a single supplier's tolerance. Ask us for the drawing of a specific size and we will send it. 참고. 아래 값은 공개된 규격(JIS B 6339, DIN 69871, DIN 69893 등) 기준이며 특정 업체의 공차값이 아닙니다. 필요한 사이즈의 도면은 요청하시면 보내드립니다.
04 — Spec table
No login, no download, no phone call first. If you need a size that is not listed, it is still probably in stock — ask. 로그인도, 다운로드도, 먼저 전화하실 필요도 없습니다. 목록에 없는 사이즈도 대개 대응 가능합니다 — 문의만 주십시오.
| STANDARD규격 | SIZES대표 사이즈 | TAPER | CONTACT접촉 | TYPICAL SPINDLE대응 스핀들 | ATC자동교환 |
|---|
05 — Inquiry